By Kevin Chisholm
Posted 11/15/2026
What the DiMarzio Area 67 Is (and What It Isn’t)
The DiMarzio Area 67 (DP419) is part of DiMarzio’s Area Series, a family of hum-canceling single-coil pickups that blend vintage tone with modern engineering. Built in the U.S., it targets the sound of late-’60s Strat pickups—specifically the chimey, glassy tones from 1967, the era that gave it its name. Where the originals were noisy, the Area 67 stays quiet thanks to its stacked coil design. The result is a pickup that captures all the sparkle and clarity you’d expect from a vintage single-coil, without the annoying hum that usually comes with it.
Design & Build
Under the hood, the Area 67 uses Alnico 5 magnets and engineering to achieve its tone. It’s a four-conductor pickup, so it’s ready for flexible wiring setups if you like to experiment with coil combinations, although to my ears, the tapped output is not much to shout about. The DC resistance clocks in at around 5.86kΩ, putting it right in line with a classic low-output Strat pickup. Cover options include black and white, so it blends easily into just about any Strat-style guitar. I am not 100% sure if it’s wax-potted, but in practice, it’s very stable and I have never experienced the microphonic headaches that can plague some vintage single coil pickups.
Tone & Feel
The Area 67 has a tone that leans toward the glassy end of the spectrum. There’s a lot of note separation, perfect for clean or edge-of-breakup tones. It delivers that “bell tone” that makes single-coils so appealing, but there’s also a surprising amount of body. The hum-canceling design means you can crank up gain or play under harsh lighting without the usual buzz.
Depending on how you set pickup height, the Area 67 really shifts personality. Closer to the strings, it gets snappier and more percussive; lower it down, and it opens up, with more air. Players who like to fine-tune their setup will find it rewarding; subtle height tweaks can make a big difference in both tone and feel. Personally, I like these close to the strings for maximum punch, and then I roll-back the volume knob when I want a more gentle feel.
Versatility
The Area 67 has earned praise from players like Paul Gilbert for a reason. It’s versatile enough to handle just about any style—funk, pop, classic rock, even fusion—without losing its fundamental clarity. Whether strumming rhythm parts or picking through clean arpeggios, the response felts dynamic and alive to me. You can pair it with a slightly hotter bridge pickup (like a DiMarzio Area 61 or Virtual Vintage Heavy Blues 2), for a balanced, hum-free setup that covers a solid range of tones.
Real-World Use
In the studio, the Area 67 could be helpful because of its quiet operation. No need to gate out hum or fight interference. Live, it’s equally dependable. Its hum-canceling design means even venues with questionable power won’t add unwanted noise. The feel is natural and responsive, with that Strat-style spank intact.
Highly recommended for Strat players who want a vintage tone without the usual noise.
DiMarzio Area 67 Specs & Pricing
Specs
- Model Number: DP419
- Magnet: Alnico 5
- DC Resistance: 5.86 kΩ (neck/bridge)
- Wiring: 4-conductor
- Cover Options: Black or white
- Made in: USA
Pricing
Retail pricing for the DiMarzio Area 67 sits around $99 USD, depending on finish and vendor. Street prices hover closer to $85–$95 from popular outlets like Sweetwater, Amazon, Reverb, and eBay. That puts it comfortably within reach for players looking to upgrade without dropping boutique-level money.
